Administrator Guide

Dell Networking CLI 119
Link Dependency
LLDP
show iscsi Displays the iSCSI settings. PE
show iscsi sessions Displays the iSCSI sessions. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
action Indicates if the link-dependency group should
mirror or invert the status of the depended on
interfaces.
LD
link-dependency group Enters the link-dependency mode to configure
a link-dependency group.
GC
add Adds member gigabit Ethernet port(s) to the
dependency list.
LD
depends-on Adds the dependent Ethernet ports or port
channels list.
LD
show link-dependency Shows the link dependencies configured on a
particular group.
PE
Command Description Mode
a
clear lldp remote-data Deletes all data from the remote data table. PE
clear lldp statistics Resets all LLDP statistics. PE
dcb enable Enables the sending of DCBX information
in LLDP frames.
GC
lldp med Enables/disables LLDP-MED on an interface. IC
lldp med confignotification Enables sending the topology change
notification.
IC
lldp med
faststartrepeatcount
Sets the value of the fast start repeat count. GC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 119 Monday, January 25, 2016 1:25 PM