Administrator Guide

Layer 3 Routing Commands 1255
Example
console(config-router)#clear ip bgp
clear ip bgp counters
Use the clear ip bgp counters resets all BGP counters to 0. These counters
include send and receive packet and prefix counters for all neighbors.
Syntax
clear ip bgp [vrf vrf-name ] counters
• vrf-name —This optional parameter identifies the VRF for which to clear
counters. If not given, the default VRF counters are cleared.
Default Configuration
There is no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
There are no user guidelines.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console(config-router)#clear ip bgp counters
default-information originate (BGP Router
Configuration)
Use the default-information originate command to enable BGP to originate
a default route.
Syntax
default-information originate [ always ]
2CSNXXX_SWUM204.book Page 1255 Monday, January 25, 2016 1:25 PM