Administrator Guide

Layer 3 Routing Commands 1337
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Path
*> 2001:DB8::/48 3FFE:100::1 10 100 20 10 i
3FFE:200::4
*> 2001:DB8:4:5::/64 3FFE:100::1 10 100 20 10 ?
show bgp ipv6 aggregate-address
Use this command to display the configured IPv6 aggregate addresses and
indicates if each address is currently active. This command replaces and
deprecates the show ipv6 bgp aggregate-address command.
Syntax
show bgp ipv6 aggregate address-group
Default Configuration
There is no default configuration.
Command Mode
Privileged EXEC
User Guidelines
The following fields are displayed.
Field Description
Prefix/Len Destination prefix and prefix length.
AS Set Indicates if an empty AS path is advertised with the
aggregate address (N) or an AS SET is advertised with
the set of AS numbers for the paths contributing to the
aggregate (Y).
Summary Only Indicates if the individual networks are suppressed (Y)
or advertised (N).
Active Indicates if the aggregate is currently being advertised.
2CSNXXX_SWUM204.book Page 1337 Monday, January 25, 2016 1:25 PM