Administrator Guide

Layer 3 Routing Commands 1338
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console# show bgp ipv6 aggregate-address
Prefix/Len AS Set Summary Only Active
---------------- ------ ------------ ------
2001:DB8::/48 N Y Y
3ffe:4000:1::/48 N Y Y
show bgp ipv6 community
Use this command to display IPv6 routes that belong to the specified set of
communities. This command replaces and deprecates the show ipv6 bgp
community command
Syntax
show bgp ipv6 community communities [ exact-match ]
• communities —A string of zero or more community values, which may be
in either format and may contain the well-known community keywords no-
advertise and no-export. The output displays routes that belong to every
community specified in the command.
•
exact-match — Only displays routes that are members of those and only
those communities specified in the command.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
The following fields are displayed.
2CSNXXX_SWUM204.book Page 1338 Monday, January 25, 2016 1:25 PM