Administrator Guide

Layer 3 Routing Commands 1340
show bgp ipv6 community-list
Use this command to display the IPv6 routes that match a specified
community list.
Syntax
show bgp ipv6 community-list name [ exact-match ]
• name —A standard community list name.
•
exact-match —Displays only routes that are an exact match for the set of
communities in the matching community list statement.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, all show modes
User Guidelines
The following fields are displayed.
Field Description
BGP table version Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented.
Status codes
• s—The route is aggregated into an aggregate address
configured with the summary-only option
• *—Dell Networking BGP never displays invalid routes;
so this code is always displayed (to maintain
consistency with the industry standard)
• >—Indicates that BGP has selected this path as the
best path to the destination
•
i —If the route is learned from an internal peer
Network IPv6 Destination prefix
Next Hop The route’s BGP next hop
Metric Multi-Exit Discriminator
2CSNXXX_SWUM204.book Page 1340 Monday, January 25, 2016 1:25 PM