Administrator Guide

Layer 3 Routing Commands 1341
Command History
Introduced in version 6.2.0.1 firmware.
Example
BGP table version is 0, local router ID is 65.1.1.1
Status Codes: s suppressed, * valid, > best, i - internal
Origin Codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------ --------------- --------- ---------- ------------- ------
show bgp ipv6 listen range
Use the show bgp ipv6 listen range command to display information about
IPv6 BGP listen ranges.
Syntax
show bgp ipv6 [vrf vrf-name ] listen range [ network / length ]
• network / length — Displays information about the specified listen range.
•
vrf-name —The name of a previously configured VRF.
Default Configuration
There is no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
There are no usage guidelines.
LocPrf The local preference
Path The AS path
Origin The value of the Origin attribute
2CSNXXX_SWUM204.book Page 1341 Monday, January 25, 2016 1:25 PM