Administrator Guide

Layer 3 Routing Commands 1346
Command History
Introduced in version 6.2.0.1 firmware. Modified in version 6.3.0.1 firmware.
Example
console# show bgp ipv6 neighbors fe80::2
Description: spine 1 router 1
Remote Address ................................ fe80::2
Interface...................................... 0/1
Remote AS ..................................... 100
Peer ID ....................................... 14.3.0.1
Received Update Queue
Size
Received UPDATE messages are queued for processing.
This section shows the current length of the neighbor’s
UPDATE queue in bytes, the high water mark, the
limit, and the number of UPDATEs that have been
dropped because the queue reached the limit.
The following fields are displayed for IPv4 and for IPv6.
Prefixes Advertised A running count of the number of prefixes advertised to
or received from this neighbor.
Prefixes Withdrawn A running count of the number of prefixes included in
the Withdrawn Routes portion of UPDATE messages,
to and from this neighbor.
Prefixes Current The number of prefixes currently advertised to or
received from this neighbor. For inbound prefixes, this
count only includes prefixes that passed inbound policy.
Prefixes Accepted The number of prefixes from this neighbor that are
eligible to become active in the local RIB. Received
prefixes are ineligible if their BGP Next Hop is not
resolvable or if the AS Path contains a loop. A prefix is
only considered accepted if it passes inbound policy.
Prefixes Rejected The number of prefixes currently received from this
neighbor that fail inbound policy.
Max NLFI per Update The maximum number of prefixes included in a single
UPDATE message, to and from this neighbor.
Min NLRI per Update The minimum number of prefixes included in a single
UPDATE message, to and from this neighbor.
2CSNXXX_SWUM204.book Page 1346 Monday, January 25, 2016 1:25 PM