Administrator Guide

Dell Networking CLI 133
show port protocol Displays the Protocol-Based VLAN information
for either the entire system or for the indicated
group.
PE
show switchport ethertype Displays the configured Ethertype for each
interface.
PE
show vlan Displays detailed information, including
interface information and dynamic vlan type,
for a specific VLAN.
PE
show vlan association mac Displays the VLAN associated with a specific
configured MAC address.
PE
show vlan association subnet Displays the VLAN associated with a specific
configured IP subnet.
PE
show vlan private-vlan Displays information about the configured
private VLANs.
PE
switchport access vlan Configures the VLAN ID when the interface is
in access mode.
IC
switchport dot1q ethertype
(Global Configuration)
Defines additional QinQ tunneling TPIDs
for matching in the outer VLAN tag of
received frames.
GC
switchport general forbidden
vlan
Forbids adding specific VLANs to a port. IC
switchport general
acceptable-frame-type
tagged-only
Discards untagged frames at ingress. IC
switchport general allowed
vlan
Adds or removes VLANs from a port in General
mode.
IC
switchport general ingress-
filtering disable
Disables port ingress filtering. IC
switchport general pvid Configures the PVID when the interface is in
general mode.
IC
switchport mode Configures the VLAN membership mode of a
port.
IC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 133 Monday, January 25, 2016 1:25 PM