Administrator Guide

Layer 3 Routing Commands 1352
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC and all show modes
User Guidelines
The following fields are displayed.
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console#show bgp ipv6 neighbors 1010:10::103 routes
Local router ID is 0.0.0.101
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------- ---------------- ---------- ------- ------------- ------
1010:10::/64 1010:10::103 0 65001 i
2020:20::/64 1010:10::103 0 65001 i
console#show bgp ipv6 neighbors fe80::21e:c9ff:fede:b51a interface vl10
received-routes
Field Description
Network The destination prefix.
Next Hop The BGP Next Hop as advertised by the peer.
Metric The value of the MED, if a MED is received from the
peer.
Local Pref The local preference received from the peer.
Path The AS path as received from the peer.
Origin The value of the Origin attribute as received from the
peer.
2CSNXXX_SWUM204.book Page 1352 Monday, January 25, 2016 1:25 PM