Administrator Guide

Layer 3 Routing Commands 1356
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console#show bgp ipv6 summary
IPv6 Routing .................................. Enable
BGP Admin Mode ................................ Enable
BGP Router ID ................................. 1.1.1.1
Default Route Advertise Whether BGP is configured to advertise a default route.
Corresponds to default-information originate.
Redistributing
Source A source of routes that BGP is configured to
redistribute.
Metric The metric configured with the redistribute command.
Match Value For routes redistributed from OSPF, the types of OSPF
routes being redistributed.
Distribute List The name of the prefix list used to filter redistributed
routes, if one is configured with the distribute-list out
command.
Route Map The name of the route map used to filter redistributed
routes.
Neighbor The IP address of a neighbor
ASN The neighbor’s ASN
MsgRcvd The number of BGP messages received from this
neighbor
MsgSent The number of BGP messages sent to this neighbor
State The adjacency state. One of IDLE, CONNECT,
ACTIVE, OPEN SENT, OPEN CNFRM, EST
Up/Down Time How long the adjacency has been in the
ESTABLISHED state, or, if the adjacency is down, how
long it has been down. In days:hours:minutes:seconds
Pfx Rcvd The number of IPv6 prefixes received from the neighbor
2CSNXXX_SWUM204.book Page 1356 Monday, January 25, 2016 1:25 PM