Administrator Guide

Layer 3 Routing Commands 1358
• ipv6-address [ interface interface-id ]—The IPv6 address of a peer. If the
peer address is a link local address, the interface that defines the scope of
the address must also be given. If a peer address is specified, this option
restricts the output to the update group containing the peer with the given
address.
•
autodetect interface interface-id —(Optional) The routing interface on
which the neighbor’s link local IPv6 address is auto detected. The
interface-id must be a VLAN routing interface.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC and all show modes
User Guidelines
The update send history table show statistics on as many as the fifteen most
recent executions of the update send process for the update group. Items in
the history table are as follows:
The following information is displayed.
Fields Description
Version The update version.
Delta T The amount of time elapsed since the update send
process executed. hours::minutes::seconds.
Duration How long the update send process took, in milliseconds
UPD Built The number of UPDATE messages built.
UPD Sent The number of UPDATE messages successfully
transmitted to group members. Normally a copy of each
UPDATE message built is sent to each group member.
Paths Sent The number of paths advertised.
Pfxs Adv The number of prefixes advertised.
Pfxs Wd The number of prefixes withdrawn.
2CSNXXX_SWUM204.book Page 1358 Monday, January 25, 2016 1:25 PM