Administrator Guide

Layer 3 Routing Commands 1360
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
show bgp ipv6 route-reflection
Use this command to display a summary of BGP route reflection. This
command deprecates and replaces the show ipv6 bgp route-reflection
command.
Syntax
show bgp ipv6 route-reflection
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
If a route reflector client is configured with an outbound route map, the
output warns that set statements in the route map are ignored when
reflecting routes to this client.
The following information is displayed.
UPDATE Send Failures The number of UPDATE messages that failed to be
delivered to all members of the group.
Current Members The IPv4 address of all current members of the group.
Field Description
Cluster ID The cluster ID used by this router. The value is tagged
as configured when the value is configured with the bgp
cluster-id command. When no cluster ID is configured,
the local router ID is shown and tagged as default.
2CSNXXX_SWUM204.book Page 1360 Monday, January 25, 2016 1:25 PM