Administrator Guide

Layer 3 Routing Commands 1362
• shorter-prefixes [ length ]—(Optional) Used with the network / pfx-len
option to show routes whose prefix length is shorter than
pfx-len , and,
optionally, longer than a specified length. This option may not be given if
the
longer-prefixes option is given.
•
filter-list as-path-list —(Optional) Filter the output to the set of routes
that match a given AS Path list. This option may not be given if a
network / pfx-len option is given.
•
Prefix-list list-name —(Optional) The name of a prefix list indicating the
list of matching routes to display.
Default Configuration
There is no default configuration.
Command Mode
User Exec mode, Privileged EXEC mode, Global Configuration mode and all
sub-modes.
User Guidelines
The following fields are displayed.
Field Description
BGP table version Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented.
Status codes
• s—The route is aggregated into an aggregate address
configured with the summary-only option
• *—Dell Networking BGP never displays invalid routes;
so this code is always displayed (to maintain
consistency with the industry standard)
• >—Indicates that BGP has selected this path as the
best path to the destination
•
i —If the route is learned from an internal peer
Network Destination prefix
Next Hop The route’s BGP next hop
Metric Multi-Exit Discriminator
2CSNXXX_SWUM204.book Page 1362 Monday, January 25, 2016 1:25 PM