Administrator Guide

Layer 3 Routing Commands 1363
Command History
Introduced in version 6.2.0.1 firmware.
Example
console# show ip bgp
BGP table version is 5, local router ID is 20.1.1.1
Status codes: s suppressed, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Path Origin
*> 172.20.1.0/24 100.10.1.1 10 100 20 10 i
200.10.1.1
*> 172.20.2.0/24 100.10.1.1 10 100 20 10 ?
show ip bgp aggregate-address
Use the show ip bgp aggregate-addresss command to list the aggregate
addresses that have been configured and indicates whether each is currently
active.
Syntax
show ip bgp [vrf vrf-name ] aggregate-address
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
Privileged EXEC mode, Global Configuration mode, and all sub-modes.
LocPrf The local preference
Path The AS path
Origin The value of the Origin attribute
2CSNXXX_SWUM204.book Page 1363 Monday, January 25, 2016 1:25 PM