Administrator Guide

Layer 3 Routing Commands 1366
• vrf vrf-name —Displays the route information associated with the named
VRF.
•
name —A standard community list name.
•
exact-match —(Optional) Only displays routes that are members of those
and only those communities specified in the command.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec and Global Config modes
User Guidelines
If the vrf argument is specified, the community list information pertaining to
that VRF is displayed.
Command History
Introduced in version 6.2.0.1 firmware. Updated in the version 6.3.0.1
firmaware.
Example
console(config)#show ip bgp community-list test
BGP table version is 0, local router ID is 65.1.1.1
Status Codes: s suppressed, * valid, > best, i - internal
Origin Codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------ --------------- ---------- --------- ------------- ------
show ip bgp extcommunity-list
Use the show ip bgp extcommunity-list command to display all the permit
and deny attributes of the given extended community list. If the
list-number
is specified, the output is displayed that matches the given
list-number ; else
all the lists are displayed.
2CSNXXX_SWUM204.book Page 1366 Monday, January 25, 2016 1:25 PM