Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch N2100 Series
1361136213631364136513661367136813691370
Layer 3 Routing Commands 1368
show ip bgp listen range
Use the show ip bgp listen range command to display information about IPv4
BGP listen ranges.
Syntax
show ip bgp [vrf
vrf-name
] listen range [
network/length
]
•
network/length
— Displays information about the specified listen range.
•
vrf-name
—The name of a previously configured VRF.
Default Configuration
By default, all listen ranges are shown.
Command Mode
Privileged Exec and global configuration mode
User Guidelines
There are no user guidelines.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console(config-router)#show ip bgp listen range
Listen Range .................................. 10.27.0.0/16
Inherited Template ............................ template_10_27
Member ASN State
---------------- ----- -----------
10.27.8.189 65001 OPENCONFIRM
10.27.128.235 0 ACTIVE
Listen Range .................................. 15.15.0.0/24
Inherited Template ............................ template_15_15
Member ASN State
---------------- ----- -----------
2CSNXXX_SWUM204.book Page 1368 Monday, January 25, 2016 1:25 PM