Administrator Guide

Layer 3 Routing Commands 1377
Command History
Introduced in version 6.2.0.1 firmware.
Updated in version 6.3.0.1 firmware.
Example
console#show ip bgp neighbors 10.10.10.10 advertised-routes
BGP table version is 5, local router ID is 0.0.0.100
Status codes: p - advertisement pending
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------- ---------------- ---------- ------- ------------- -----
172.20.1.0/24 172.20.101.1 10 100 20 10 i
p 20.1.1.0/24 172.20.101.1 100 20 ?
show ip bgp neighbors received-routes
This command displays the list of routes received from a specific neighbor.
The list includes both the accepted and rejected routes.
Syntax
show ip bgp [vrf vrf-name ]neighbors ip-address {received-
routes|routes|rejected-routes}
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
•
ip-address —The IPv4 address of a BGP neighbor.
• Received-routes—Display the routes received by a particular neighbor
prior to filtering.
Metric The value of the Multi Exit Discriminator, if the MED
is advertised to the peer.
Path The AS path. The AS path does not include the local AS
number, which is added to the beginning of the AS path
when a route is advertised to an external peer.
Origin The value of the Origin attribute.
2CSNXXX_SWUM204.book Page 1377 Monday, January 25, 2016 1:25 PM