Administrator Guide

Layer 3 Routing Commands 1384
Example
console#show ip bgp statistics
Delta T Phase UpdGrp GenId Reason Peer Duration Adds Mods Dels
-------- ----- ------ ----- -------------- ------- -------- ----- ----- -----
02:01:07 2 3 Local route add 0 3 0 0
00:10:38 3 0 3 New update grp 0 3 0 0
00:05:51 2 4 Local route add 0 1 0 0
00:05:51 3 0 4 Phase 2 done 0 1 0 0
00:05:30 2 5 Local route del 0 0 0 1
00:05:20 3 0 5 Phase 2 done 0 0 0 1
show ip bgp summary
This command displays a summary of BGP configuration and status.
Syntax
show ip bgp [vrf vrf-name ] summary
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
User Exec mode, Privileged EXEC mode, Global Config mode and all sub-
modes.
User Guidelines
If the vrf-name argument is specified, information pertaining to that VRF is
displayed.
The following information is displayed.
Fields Description
Admin Mode Whether BGP is globally enabled.
BGP Router ID The configured router ID
2CSNXXX_SWUM204.book Page 1384 Monday, January 25, 2016 1:25 PM