Administrator Guide

Layer 3 Routing Commands 1393
Current Members: 172.20.1.100, 172.20.2.100
Version Delta T Duration UPD Built UPD Sent Paths Sent Pfxs Adv Pfxs Wd
10 00:33:49 100 6 288 5 1250 750
11 00:33:49 0 4 192 3 750 250
12 00:33:49 0 2 96 1 250 1000
13 00:33:49 0 2 96 1 250 1018
14 00:33:49 0 1 48 0 0 482
15 00:33:49 100 8 384 7 1750 750
16 00:33:49 0 3 144 2 500 250
17 00:31:49 0 4 192 3 750 750
18 00:23:49 100 4 192 3 750 1000
19 00:03:49 100 6 288 5 1250 500
Update Group ID............................ 1
Peer Type.................................. Internal
Minimum Advertisement Interval............. 5 seconds
Send Community............................. Yes
Neighbor AS Path Access List Out........... none
Neighbor Prefix List Out................... none
Members Added.............................. 3
Members Removed............................ 0
Update Version............................. 4
Number of UPDATEs Sent..................... 8
Time Since Last UPDATE..................... 3 hrs 13 min 22 sec
Current Prefixes........................... 84
Current Paths.............................. 2
Prefixes Advertised........................ 100
Prefixes Withdrawn......................... 16
UPDATE Send Failures....................... 0
Current Members: 172.24.3.1, 172.25.8.56, 172.28.9.1
Version Delta T Duration UPD Built UPD Sent Paths Sent Pfxs Adv Pfxs Wd
10 00:00:49 100 6 288 5 1250 750
show ip bgp vpn4
Use the show ip bgp vpn4 command to display the VPNv4 address
information from the BGP table. If the vrf argument is specified, the address
information pertaining to that VRF is displayed.
2CSNXXX_SWUM204.book Page 1393 Monday, January 25, 2016 1:25 PM