Administrator Guide

Layer 3 Routing Commands 1398
Atomic Aggregate........................... Included
Aggregator (AS, Router ID)................. 300, 14.1.1.1
Communities................................ no-export
Extended Community......................... RT:1:100
RT:2:200
Originator................................ 10.1.1.1
Non-best Paths:
Local Preference........................... 200
AS Path.................................... 18 50 27
Origin..................................... Incomplete
Type....................................... External
IGP Cost................................... 10
Peer (Peer ID)............................. 200.1.1.1 (18.24.1.3)
BGP Next Hop............................... 200.1.1.1
Extended Community......................... RT:3:300
show router-capability
Use this command to display the router capabilities of the loaded firmware
image.
Syntax
show router-capability
Default Configuration
For the N3000_N2000v6.3.x.x builds, ACCESS ROUTER capabilities are
supplied. MP-BGP capability is not available with this firmware.
For the N3000BGPv6.3.x.x builds, AGGREGATION ROUTER capabilities
are supplied. iSCSI, MLAG, DVLAN, MVR, GARP, Auto-VoIP, and Web
capabilities are unavailable.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes.
User Guidelines
The capabilities in the switch firmware are determined during the build
process.
2CSNXXX_SWUM204.book Page 1398 Monday, January 25, 2016 1:25 PM