Administrator Guide
Layer 3 Routing Commands 1422
ip prefix-list fred:
count: 3, range entries: 3, sequences: 5 - 15, refcount: 0
console#show ip prefix-list detail fred
ip prefix-list fred:
count: 3, range entries: 3, sequences: 5 - 15, refcount: 0
seq 5 permit 10.10.1.1/20 ge 22 (hitcount: 0)
seq 10 permit 10.10.1.2/20 le 30 (hitcount: 0)
seq 15 permit 10.10.1.2/20 ge 29 le 30 (hitcount: 0)
show ipv6 prefix-list
This command displays the contents of IPv6 prefix lists.
Syntax
show ipv6 prefix-list [detail [
prefix-list-name
] | summary [
prefix-list-name
]
|
prefix-list-name
[
ipv6
-
prefix/prefix-length
[longer] [first-match] | seq
sequence-number
]]
•
detail | summary
– (Optional) Displays detailed or summarized
information about all prefix lists.
•
prefix-list-name –
(Optional) The name of a specific prefix list.
Information is limited to this particular prefix list.
•
ipv6-prefix
-
An IPv6 network assigned to the specified prefix list.
This
argument must be in the form documented in RFC 2373 where the address is
specified in hexadecimal using 16-bit values between 0x00 and 0xff and
separated by colons
.
•
prefix-length -
The length of the IPv6 prefix given as part of the
ipv6-prefix
.
Required if a prefix is specified. A decimal value in the range 0 to 128 that
indicates how many of the high-order contiguous bits of the address comprise
the prefix (the network portion of the address) in /
length
format. A slash
mark must precede the decimal value in /length format.
•
seq
– (Optional) Applies the sequence number to the prefix list entry.
•
sequence-number –
(Optional) The sequence number of the prefix list
entry.
•
longer
– (Optional) Displays all entries of a prefix list that are more
specific than the given
network/length
.
2CSNXXX_SWUM204.book Page 1422 Monday, January 25, 2016 1:25 PM