Administrator Guide

Layer 3 Routing Commands 1426
Command History
Introduced in version 6.2.0.1 firmware.
Example
The command below clears the counters only for the matching statement in
the IPv6 prefix list apple.
Router# clear ipv6 prefix-list apple FF05::/35
clear ip community-list
To reset the IPv6 prefix-list counters, use the clear ipv6 prefix-list command.
Syntax
clear ip community-list [ list-name ]
• list-name— (Optional) Name of the community list for which the hit
count is to be cleared.
Default Configuration
No community lists are configured by default.
Command Mode
Privileged Exec mode
User Guidelines
This command is used to clear the community list hit counters. The hit count
is a value indicating the number of matches to a specific list entry. The
counters are also cleared by the global clear counters command.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The command below clears the counters only for the matching community
apple.
Router# clear ip community-list apple
2CSNXXX_SWUM204.book Page 1426 Monday, January 25, 2016 1:25 PM