Administrator Guide

Dell Networking CLI 141
TACACS+
radius-server source-inteface Selects the interface from which to use the
IP address in the source IP address field of
transmitted RADIUS packets.
GC
radius-server timeout Sets the interval for which a switch waits for a
RADIUS server to reply.
GC
retransmit Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show aaa servers Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
UE or
PE
show radius statistics Shows the statistics for an authentication or
accounting server.
UE or
PE
source-ip Specifies the source IP address to be used for
communication with RADIUS servers.
R
timeout Sets the timeout value in seconds for the
designated RADIUS server.
R
usage Specifies the usage type of the server. R
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
key Specifies the authentication and encryption key
for all TACACS communications between the
device and the TACACS server.
TC
port Specifies a server port number. TC
priority Specifies the order in which servers are used. TC
show tacacs Displays TACACS+ server settings and
statistics.
PE
tacacs-server host Specifies a TACACS+ server host. GC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 141 Monday, January 25, 2016 1:25 PM