Administrator Guide

Layer 3 Routing Commands 1439
Default Configuration
The command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
console#clear ip dhcp binding 1.2.3.4
clear ip dhcp conflict
Use the clear ip dhcp conflict command in Privileged Exec mode to remove
DHCP server address conflicts. Use the
show ip dhcp conflict command to
display address conflicts detected by the DHCP server.
Syntax
clear ip dhcp conflict {ip-address | *}
• * —Clear all automatic dhcp bindings.
•
ip-address —Clear a specific address conflict.
Default Configuration
The command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
console#clear ip dhcp conflict *
2CSNXXX_SWUM204.book Page 1439 Monday, January 25, 2016 1:25 PM