Administrator Guide

Dell Networking CLI 144
Captive Portal
show dot1x authentication-
history
Displays the dot1x authentication events and
information during successful and unsuccessful
dot1x authentication processes.
PE
show dot1x clients Displays detailed information about the users
who have successfully authenticated on the
system or on a specified port.
PE
show dot1x interface Shows the status of MAC Authentication
Bypass.
PE
show dot1x interface
statistics
Displays 802.1X statistics for the specified
interface.
PE
show dot1x users Displays active 802.1X authenticated users for
the switch.
PE
clear dot1x
authentication–history
Clears the authentication history table captured
during successful and unsuccessful
authentication.
PE
dot1x guest-vlan Sets the guest VLAN on a port. IC
dot1x unauth-vlan Specifies the unauthenticated VLAN on a port. IC
show dot1x advanced Displays 802.1X advanced features for the
switch or specified interface.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
authentication timeout Configures the authentication timeout. CP
captive-portal Enables the captive portal configuration mode. GC
enable Globally enables captive portal. CPI
http port Configures an additional HTTP port for captive
portal to monitor.
CP
https port Configures an additional HTTPS port for
captive portal to monitor.
CP
show captive-portal Displays the status of captive portal. PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 144 Monday, January 25, 2016 1:25 PM