Administrator Guide

Layer 3 Routing Commands 1458
User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. The IPv4 address of the NTP server is conveyed in the Option 42
TLV of the DHCP OFFER, DHCP ACK, DHCP INFORM ACK and DHCP
BOOTREPLY messages.
Example
console(config-dhcp-pool)#sntp 192.168.21.2
show ip dhcp binding
Use the show ip dhcp binding command in Privileged Exec mode to display
the configured DHCP bindings.
Syntax
show ip dhcp binding [address]
• address —A valid IPv4 address
Default Configuration
The command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console(config)# show ip dhcp binding
IP address Hardware Address Expires Type client-DUID
----------- ----------------- --------- ----- --------------
10.10.10.3 00:0e:c6:88:0e:98 00:23:56 Auto
00:01:01:02:03:04:05:06:00:0e:c6:88:0e:98
2CSNXXX_SWUM204.book Page 1458 Monday, January 25, 2016 1:25 PM