Administrator Guide

Layer 3 Routing Commands 1460
User Guidelines
This command has no user guidelines.
Example
console#show ip dhcp server statistics
show ip dhcp pool
Use the show ip dhcp pool command in User Exec or Privileged Exec mode
to display the configured DHCP pool or pools. If no pool name is specified,
information about all pools is displayed.
Syntax
show ip dhcp pool [all | poolname ]
• poolname —Name of the pool. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
show ip dhcp server statistics
Use the show ip dhcp server statistics command in Privileged Exec mode to
display the DHCP server binding and message counters.
Syntax
show ip dhcp server statistics
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 1460 Monday, January 25, 2016 1:25 PM