Administrator Guide

Layer 3 Routing Commands 1463
Examples
The following examples clears DHCPv6 statistics for VLAN 11.
console#clear ipv6 dhcp interface vlan 11 statistics\
dns-server (IPv6 DHCP Pool Config)
Use the dns-server command in IPv6 DHCP Pool Configuration mode to set
the IPv6 DNS server address which is provided to a DHCPv6 client by the
DHCPv6 server. DNS server address is configured for stateless server support.
Syntax
dns-server ipv6-address
no dns-server ipv6-address
• ipv6-address —Valid IPv6 address.
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
domain-name (IPv6 DHCP Pool Config)
Use the domain-name command in IPv6 DHCP Pool Configuration mode to
set the DNS domain name which is provided to a DHCPv6 client by the
DHCPv6 server. DNS domain name is configured for stateless server support.
Syntax
domain-name domain
no domain-name domain
• domain — DHCPv6 domain name. (Range: 1–255 characters)
2CSNXXX_SWUM204.book Page 1463 Monday, January 25, 2016 1:25 PM