Administrator Guide

Layer 3 Routing Commands 1470
show ipv6 dhcp
Use the show ipv6 dhcp command in Privileged Exec mode to display the
DHCPv6 server name and status.
Syntax
show ipv6 dhcp
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Configuration mode and all Configuration
submodes
User Guidelines
The DUID value of the server will only appear in the output when a DHCPv6
lease is active.
Example
The following example displays the DHCPv6 server name and status.
console#show ipv6 dhcp
DHCPv6 is disabled
Server DUID:
show ipv6 dhcp binding
Use the show ipv6 dhcp binding command in Privileged Exec mode to
display the configured DHCP pool.
Syntax
show ipv6 dhcp binding [ ipv6-address ]
• ipv6-address — Valid IPv6 address.
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 1470 Monday, January 25, 2016 1:25 PM