Administrator Guide

Layer 3 Routing Commands 1499
User Guidelines
This command has no user guidelines.
Example
The following example configures a metric of 5 for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip dvmrp metric 5
show ip dvmrp
Use the show ip dvmrp command in Privileged Exec mode to display the
system-wide information for DVMRP.
Syntax
show ip dvmrp
Default Configuration
This command has no default condition.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide information for DVMRP.
console(config)#show ip dvmrp
Admin Mode................................. Enabled
Version.................................... 3
Total Number of Routes..................... 0
Reachable Routes........................... 0
DVMRP INTERFACE STATUS
Interface Interface Mode Operational-Status
--------- -------------- ------------------
2CSNXXX_SWUM204.book Page 1499 Monday, January 25, 2016 1:25 PM