Administrator Guide

Layer 3 Routing Commands 1500
show ip dvmrp interface
Use the show ip dvmrp interface command in Privileged Exec mode to
display the interface information for DVMRP on the specified interface.
Syntax
show ip dvmrp interface vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default condition.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays interface information for VLAN 11 DVMRP.
console(config)#show ip dvmrp interface vlan 11
Interface Mode................................. Enabled
Interface Metric .............................. 1
Local Address ................................. 10.1.0.2
show ip dvmrp neighbor
Use the show ip dvmrp neighbor command in Privileged Exec mode to
display the neighbor information for DVMRP.
Syntax
show ip dvmrp neighbor
Default Configuration
This command has no default condition.
2CSNXXX_SWUM204.book Page 1500 Monday, January 25, 2016 1:25 PM