Administrator Guide

Layer 3 Routing Commands 1502
show ip dvmrp prune
Use the show ip dvmrp prune command in Privileged Exec mode to display
the table that lists the router’s upstream prune information.
Syntax
show ip dvmrp prune
Default Configuration
This command has no default condition.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the table that lists the router’s upstream
prune information.
console(config)#show ip dvmrp prune
Group IP Source IP Source Mask Expiry Time(secs)
-------------- -------------- -------------- ----------------
239.0.1.43 10.1.0.3 255.255.0.0 237
show ip dvmrp route
Use the show ip dvmrp route command in Privileged Exec mode to display
the multicast routing information for DVMRP.
Syntax
show ip dvmrp route
Default Configuration
This command has no default.
2CSNXXX_SWUM204.book Page 1502 Monday, January 25, 2016 1:25 PM