Administrator Guide

Layer 3 Routing Commands 1516
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets at 10 seconds the interval between general queries
sent at startup for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp startup-query-interval 10
ip igmp version
Use the ip igmp version command in Interface Configuration mode to
configure the version of IGMP for an interface.
Syntax
ip igmp version version
• version — IGMP version. (Range: 1-3)
Default Configuration
The default version is 3.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures version 2 of IGMP for VLAN 15.
console#interface vlan 15
console(config-if-vlan15)#ip igmp version 2
2CSNXXX_SWUM204.book Page 1516 Monday, January 25, 2016 1:25 PM