Administrator Guide

Layer 3 Routing Commands 1518
• interface-type interface-number —Interface type of VLAN and a valid VLAN
ID
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the registered multicast groups for VLAN 1.
console#show ip igmp groups interface vlan 3 detail
REGISTERED MULTICAST GROUP DETAILS
Version1 Version2 Group
Multicast Last Up Expiry Host Host Compat
IP Address Reporter Time Time Timer Timer Mode
--------------- ------------ ---------- --------- ------- -------- -----
225.0.0.5 1.1.1.5 00:00:05 00:04:15 ------ 00:04:15 v2
show ip igmp interface
Use the show ip igmp interface command in Privileged Exec mode to display
the IGMP information for the specified interface.
Syntax
show ip igmp interface [stats][ interface-type interface-number ]
• interface-type interface-number —Interface type of VLAN and a valid VLAN
ID
•
stats —Displays IGMP statistics for the specified VLAN.
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 1518 Monday, January 25, 2016 1:25 PM