Administrator Guide

Layer 3 Routing Commands 1520
Command Mode
User Exec, Privileged Exec modes, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Examples
The following examples display the list of interfaces that have registered in
the multicast group at IP address 224.5.5.5, the latter in detail mode.
console#show ip igmp interface membership 224.5.5.5
console(config)#show ip igmp interface membership 224.5.5.5 detail
show ip igmp interface stats
Use the show ip igmp interface stats command in User Exec mode to display
the IGMP statistical information for the interface. The statistics are only
displayed when the interface is enabled for IGMP.
Syntax
show ip igmp interface stats vlan vlan-id
• vlan-id — Valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Examples
The following example displays the IGMP statistical information for VLAN 7.
2CSNXXX_SWUM204.book Page 1520 Monday, January 25, 2016 1:25 PM