Administrator Guide

Layer 3 Routing Commands 1526
show ip igmp proxy-service interface
Use the show ip igmp proxy-service interface command in Privileged Exec
mode to display a detailed list of the host interface status parameters. It
displays status parameters only when IGMP Proxy is enabled.
Syntax
show ip igmp proxy-service interface
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example fails to display status parameters because IGMP Proxy
is not enabled.
console#show ip igmp proxy-service interface
Interface Index................................ vlan13
Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd Leave Sent
-----------------------------------------------------------------
1 0 0 0 ----- -----
200000
3 0 0 0 ----- -----
show ip igmp-proxy groups
Use the show ip igmp proxy-service groups command in Privileged Exec
mode to display a table of information about multicast groups that IGMP
Proxy reported. It displays status parameters only when IGMP Proxy is
enabled.
2CSNXXX_SWUM204.book Page 1526 Monday, January 25, 2016 1:25 PM