Administrator Guide

Layer 3 Routing Commands 1533
When in Virtual Router Configuration mode, this command operates within
the context of the virtual router instance. When in Global Configuration
mode, the command operates on the global router instance.
Virtual Router Configuration mode is only available on the N3000/N4000
switches.
Example
The following example defines a minimum wait time of 10 seconds.
console(config)#bootpdhcprelay minwaittime 10
clear ip helper statistics
Use the clear ip helper statistics command to reset to 0 the statistics
displayed in show ip helper statistics.
Syntax
clear ip helper statistics [vrf vrf-name ]
• vrf-name —The name of the VRF instance on which the command
operates. If no VRF parameter is given, counters for the default (global)
router instance is cleared.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
Example
console#clear ip helper statistics
2CSNXXX_SWUM204.book Page 1533 Monday, January 25, 2016 1:25 PM