Administrator Guide

Dell Networking CLI 153
Data Center Commands
Data Center Bridging
dot1as timeout sync Configures the number of sync intervals
expiries with no received announce
message in which case the master is
considered to be no longer transmitting.
IC
dot1as pdelay-threshold Configures the propagation delay
threshold in nanoseconds, above which an
interface is not considered capable of
participating in the 802.1AS protocol.
IC
dot1as interval pdelay-loss Configures the number of Pdelay_Req
messages for which a valid response has not
been received, above which a port is
considered to not be exchanging peer
delay messages with its neighbor.
IC
show dot1as Displays the IEEE 802.1AS configuration
for an interface or globally.
PE
show dot1as statistics Displasy the IEEE 802.1AS statistics for an
interface.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
datacenter-bridging Enables an ethernet interface to enter
DataCenterBridging mode.
IC
lldp dcbx version Configures the administrative version for
the Data Center Bridging Capability
Exchange (DCBX) protocol.
GC
lldp tlv-select dcbxp (dcb
enable)
Enables the LLDP to send DCBX TLVs, if
LLDP is enabled to transmit on the given
interface.
GC or
IC
lldp dcbx port-role Configures the port role to manual, auto-
upstream, auto-downstream and
configuration source.
IC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 153 Monday, January 25, 2016 1:25 PM