Administrator Guide

Layer 3 Routing Commands 1551
Example
The following example defines the IP address and subnet mask for VLAN 15
and enables the VLAN for routing.
console(config)#interface vlan 15
console(config-if-vlan15)#ip address 192.168.10.10 255.255.255.0
ip icmp echo-reply
Use the ip icmp echo-reply command to enable or disable the generation of
ICMP Echo Reply messages. Use the no form of this command to prevent the
generation of ICMP Echo Replies.
Syntax
ip icmp echo-reply
no ip icmp echo-reply
Default Configuration
ICMP Echo Reply messages are enabled by default.
Command Mode
Global Configuration mode, Virtual Router Configuration mode
User Guidelines
When in Virtual Router Configuration mode, this command operates within
the context of the virtual router instance. When in Global Configuration
mode, the command operates on the global router instance.
Virtual Router Configuration mode is only available on the N3000/N4000
switches.
Example
console(config)#ip icmp echo-reply
2CSNXXX_SWUM204.book Page 1551 Monday, January 25, 2016 1:25 PM