Administrator Guide

Dell Networking CLI 154
OpenFlow
show lldp tlv-select Displays the Traffic Class to Traffic Class
Group mapping.
PE
show lldp dcbx Displays the Traffic Class to Traffic Class
Group mapping.
PE
classofservice traffic-class-
group
Maps the internal Traffic Class to an
internal Traffic Class Group (TCG).
GC or
IC
traffic-class-group max-
bandwidth
Specifies the maximum transmission
bandwidth limit for each TCG as a
percentage of the interface rate.
GC or
IC
traffic-class-group min-
bandwidth
Specifies the minimum transmission
bandwidth guaranteed for each TCG
before processing frames from other TCGs
on an interface.
GC or
IC
traffic-class-group strict Activates the strict priority scheduler mode
for each specified TCG.
GC or
IC
traffic-class-group weight Specifies the scheduling weight for each
TCG.
GC or
IC
show classofservice traffic-
class-group
Displays the Traffic Class to Traffic Class
Group mapping.
PE
show interfaces traffic Displays traffic information. PE
show interfaces traffic-class-
group
Displays the Traffic Class to Traffic Class
Group mapping.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
controller Configures a connection to an OpenFlow
controller
OFC
hardware profile openflow Selects the forwarding mode for the OpenFlow
hybrid capability.
GC
ipv4 address Assigns the IPv4 source address utilized for
controller connections.
OFC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 154 Monday, January 25, 2016 1:25 PM