Administrator Guide

Layer 3 Routing Commands 1567
Default Configuration
ICMP Destination Unreachable messages are enabled.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan10)#ip unreachables
match ip address
Use this command to specify IP address match criteria for a route map. Use
the
no form of this command to delete a match statement from a route map.
Syntax
match ip address access-list-name [ access-list-name ]
no match ip address [
access-list-name ]
• access-list-name — The access-list name that identifies the named IP ACLs. The
name can be up to 31 characters in length.
Default Configuration
There is no default configuration for this command.
Command Mode
Route Map Configuration mode
User Guidelines
The IP ACL must be configured before it can be linked to a route-map.
Specifying an unconfigured IP ACL causes an error. Actions present in an IP
ACL configuration are applied along with other actions present in route-map.
When IP ACL referenced by a route-map is removed or rules are added or
deleted from that ACL, the configuration is rejected.
2CSNXXX_SWUM204.book Page 1567 Monday, January 25, 2016 1:25 PM