Administrator Guide

Dell Networking CLI 156
Layer 3 Routing Commands
ARP (IPv4)
BFD
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
arp Creates an Address Resolution Protocol (ARP)
entry.
GC
arp cachesize Configures the maximum number of entries in
the ARP cache.
GC
arp dynamicrenew Enables the ARP component to automatically
renew dynamic ARP entries when they age out.
GC
arp purge Causes the specified IP address to be removed
from the ARP cache.
PE
arp resptime Configures the ARP request response timeout. GC
arp retries Configures the ARP count of maximum request
for retries.
GC
arp timeout Configures the ARP entry age-out time. GC
clear arp-cache Removes all ARP entries of type dynamic from
the ARP cache.
PE
clear arp-cache management Removes all entries from the ARP cache learned
from the management port.
PE
ip local-proxy-arp Enables proxying of ARP requests. IC
ip proxy-arp Enables proxy ARP on a router interface. IC
show arp Displays the Address Resolution Protocol (ARP)
cache.
PE
Command Description Mode
a
feature bfd Enables BFD on the router. GC
bfd echo Enables BFD echo mode on an interface. IC
2CSNXXX_SWUM204.book Page 156 Monday, January 25, 2016 1:25 PM