Administrator Guide

Layer 3 Routing Commands 1578
show ip brief
Use the show ip brief command in Privileged EXEC mode to display all the
summary information of the IP.
Syntax
show ip brief [vrf vrf-name ]
• vrf-name —The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N4000 series switches.
Example
The following example displays IP summary information.
console#show ip brief
Default Time to Live....................... 30
Routing Mode............................... Disabled
IP Forwarding Mode......................... Enabled
Maximum Next Hops.......................... 2
show ip interface
Use the show ip interface command in Privileged EXEC mode to display
information about one or more IP interfaces. The output shows how each IP
address was assigned.
2CSNXXX_SWUM204.book Page 1578 Monday, January 25, 2016 1:25 PM