Administrator Guide

Layer 3 Routing Commands 1580
Vl2 Up unnumbered
-->loopback 2 N/A
console#
console#show ip interface vlan 1
Routing interface status....................... Up
Unnumbered - numbered interface................ Loopback 1
Unnumbered - gratuitous ARP accept............. Enable
Method......................................... None
Routing Mode................................... Enable
Administrative Mode............................ Enable
Forward Net Directed Broadcasts................ Disable
Proxy ARP...................................... Enable
Local Proxy ARP................................ Disable
Active State................................... Inactive
MAC Address.................................... 001E.C9DE.B546
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500
Bandwidth...................................... 10000 kbps
Destination Unreachables....................... Enabled
ICMP Redirects................................. Enabled
show ip policy
Use the show ip policy command in Privileged EXEC mode to display the
route maps used for policy based routing on the router interfaces.
Syntax
show ip policy map-name
• map-name —The name of a specific route map.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
2CSNXXX_SWUM204.book Page 1580 Monday, January 25, 2016 1:25 PM