Administrator Guide

Layer 3 Routing Commands 1581
Example
console#show ip policy
Interface Route map
Gi1/0/24 pbr-rmap
show ip protocols
Use the show ip protocols command in Privileged EXEC mode to display a
summary of the configuration and status for each unicast routing protocol.
The command lists all supported routing protocols, regardless of whether they
are currently configured or enabled.
Syntax
show ip protocols [vrf vrf-name ]
• vrf-name —The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N4000 series switches.
The command displays the following information.
Parameter Description
BGP Section:
Routing Protocol BGP.
Router ID The router ID configured for BGP.
Local AS Number The AS number that the local router is in.
2CSNXXX_SWUM204.book Page 1581 Monday, January 25, 2016 1:25 PM