Administrator Guide

Dell Networking CLI 157
BGP
bfd interval Configures BFD session parameters for a VLAN
routing interface.
IC
bfd slow-timer Configures the BFD periodic slow transmission
interval for BFD Control packets.
GC
ip ospf bfd Enable sending of BFD events to OSPF on
a VLAN routing interface.
IC
ipv6 ospf bfd Enables sending of BFD events to OSPF
on a VLAN routing interface.
IC
neighbor fall-over bfd Enables BFD support for a BGP neighbor. RBC
show bfd neighbor Displays the neighbors for which BFD has
established adjacencies.
PE or
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
router bgp Enables BGP and identify the autonomous
system (AS) number for the router.
GC
address-family Configures policy parameters within a peer
template to be applied to a specific address
family
PTC
address-family ipv4 vrf
address-family ipv6
Specifies IPv6 configuration parameters. BR
aggregate-address Configures a summary address for BGP. BR or
IPAF
bgp aggregate-different-
meds (BGP Router
Configuration)
Controls the aggregation of routes with
different multi-exit discriminator (MED)
attributes.
BR
bgp aggregate-different-
meds (IPv6 Address Family
Configuration)
Allows IPv6 routes with different MEDs to be
aggregated.
IPAF
Command Description Mode
a
2CSNXXX_SWUM204.book Page 157 Monday, January 25, 2016 1:25 PM