Administrator Guide

Layer 3 Routing Commands 1595
community no-export
ipv6 next-hop aa::bb
Policy routed: 0 packets, 0 bytes
The following example shows a route map test1 that is configured with
extended community attributes:
console# show route-map test
route-map test1, permit, sequence 10
Match clauses:
extended community list1
Set clauses:
extended community RT:1:100 RT:2:200
show routing heap summary
Use the show routing heap summary command in Privileged EXEC mode to
display a summary of the memory allocation from the routing heap. The
routing heap is a section of memory set aside when the system boots for use
by the routing applications.
Syntax
show routing heap summary
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode
User Guidelines
The command displays the following information.
Parameter Description
Heap Size The amount of memory, in bytes, allocated at startup for the
routing heap.
Memory In Use The number of bytes currently allocated.
2CSNXXX_SWUM204.book Page 1595 Monday, January 25, 2016 1:25 PM