Administrator Guide

Layer 3 Routing Commands 1598
clear ipv6 neighbors
Use the clear ipv6 neighbors command in Privileged Exec mode to clear all
entries in the IPv6 neighbor table or an entry on a specific interface.
Syntax
clear ipv6 neighbors [vlan vlan-id ]
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode.
ipv6 icmp error-
interval
ipv6 nd nud retry show ipv6 protocols
ipv6 mld last-
member-query-
count
ipv6 nd other-
config-flag
show ipv6 brief show ipv6 route
ipv6 mld last-
member-query-
interval
ipv6 nd prefix show ipv6 interface show ipv6 route
preferences
ipv6 mld host-proxy ipv6 nd raguard
attach-policy
show ipv6 interface
management
statistics
show ipv6 route
summary
ipv6 mld host-proxy
reset-status
ipv6 nd ra-interval show ipv6 mld
groups
show ipv6 snooping
counters
ipv6 mld host-proxy
unsolicit-rprt-
interval
ipv6 nd ra-lifetime show ipv6 mld host-
proxy
show ipv6 traffic
ipv6 mld query-
interval
ipv6 nd reachable-
time
show ipv6 mld
interface
show ipv6 vlan
ipv6 mld query-
max-response-time
–– traceroute ipv6
2CSNXXX_SWUM204.book Page 1598 Monday, January 25, 2016 1:25 PM