Administrator Guide

Dell Networking CLI 159
default metric (BGP Router
Configuration)
Sets the value of the MED attribute on routes
redistributed into BGP when no metric has
been specified.
BR
default metric (IPv6 Address
Family Configuration)
Sets the metric of redistributed IPv6 routes
when a metric is not configured in the
redistribute command.
IPAF
distance Sets the preference of BGP routes to specific
destinations.
IPAF
distance bgp (BGP Router
Configuration)
Sets the preference of BGP routes. BR
distance bgp (IPv6 Address
Family Configuration)
Sets the preference of BGP routes. IPAF
distribute-list prefix in Configures a filter that restricts the routes that
BGP accepts from all neighbors based on
destination prefix.
BR
IPAF
distribute-list prefix out
(BGP Router
Configuration)
Configures a filter that restricts the
advertisement of routes based on destination
prefix.
BR
distribute-list prefix out
(IPv6 Address Family
Configuration)
Applies an IPv6 prefix list to IPv6 routes
advertised via BGP.
IPAF
enable Globally enables BGP. BR
ip as-path access-list Creates an AS path access list. GC
ip bgp-community new-
format
Displays BGP standard communities in
AA:NN format.
GC
ip bgp fast-external-fallover Configures fast external failover behavior for a
specific routing interface.
IC
ip community-list Creates or configures a BGP community
list.
GC
ip extcommunity-list Creates an extended community list to
configure VRF route filtering.
GC
match extcommunity Matches BGP extended community list
attributes.
RM
Command Description Mode
a
2CSNXXX_SWUM204.book Page 159 Monday, January 25, 2016 1:25 PM