Administrator Guide

Dell Networking CLI 161
neighbor ebgp-multihop Configures BGP to form neighborship with
external peers that are not directly
connected.
BR,
IPAF
neighbor filter-list (BGP
Router Configuration)
Filters advertisements to or from a specific
neighbor according to the advertisement’s
AS Path.
BR
neighbor filter-list (IPv6
Address Family
Configuration)
Filters BGP to apply an AS path access list
to UPDATE messages received from or
sent to a specific neighbor.
IPAF
neighbor inherit peer Configures a BGP peer to inherit peer
configuration parameters from a peer
template.
BR
neighbor local-as Configures BGP to advertise the local-as
instead of the router’s own AS in the
routes advertised to the neighbor.
BR,
IPAF
neighbor maximum-prefix
(BGP Router
Configuration)
Configures the maximum number of IPv4
prefixes that BGP will accept from a
specified neighbor.
BR
neighbor maximum-prefix
(IPv6 Address Family
Configuration)
Specifies the maximum number of IPv6
prefixes that BGP will accept from a given
neighbor.
IPAF
neighbor next-hop-self
(BGP Router
Configuration)
Configures BGP to set the next hop
attribute to a local IP address when
advertising a route to an internal peer.
BR
neighbor next-hop-self (IPv6
Address Family
Configuration)
Configures BGP to use a local address as
the IPv6 next hop when advertising IPv6
routes to a specific peer.
IPAF
neighbor password Enables MD5 authentication of TCP
segments sent to and received from a
neighbor, and to configure an
authentication key.
BR
neighbor prefix-list (BGP
Router Configuration)
Filters advertisements sent to a specific
neighbor based on the destination prefix of
each route.
BR
Command Description Mode
a
2CSNXXX_SWUM204.book Page 161 Monday, January 25, 2016 1:25 PM